Already have a course? Access your courses

GuideGxP Training Academy

Online GMP Training Courses for Pharma Production You learn GMP by making the call.

You step into a shop-floor scene, choose what to do, see what happens to the batch and find out what EU GMP expects, with chapter and paragraph. You learn by doing, not by scrolling through slides.

  • €79,00 VAT included · one-time payment
  • Languages: Italian, English, French, German and Spanish
  • Certificate of completion with public verification
  • In the browser, on a computer or phone

Try it: this is a scene from an Academy course.

Basic level · Mission 4 · At the bench, with the batch record

Try a scene from the course

v3v2

Before you start processing the batch, you look for the processing instructions for Velorin 200 mg tablets. There are two versions on the bench.

Teaching example

On the left, the processing instructions, version 3, with the approval signature and date in the header. On the right, a photocopy of version 2 with some handwritten notes from a colleague and a sticky note: “quicker this way”.

The two instructions are almost identical. The photocopy with the notes looks more practical.

Which instruction do you use?

Incorrect

Consequence

You work from a superseded version and a handwritten change that nobody has approved. If version 3 changed a step, the batch is made with an instruction that no longer applies.

GMP requirement

Instructions are approved, signed and dated by authorised persons, have unambiguous contents, are uniquely identifiable and have an effective date. The photocopy is of a superseded version.

EU GMP Ch. 4, 4.3

Official text

Documents containing instructions should be approved, signed and dated by appropriate and authorised persons. Documents should have unambiguous contents and be uniquely identifiable. The effective date should be defined.

Revision 1 · in force since 30/06/2011

GMP requirement

GMP expects documents not to be handwritten, except for the spaces provided for entering data. A step changed in pen is not part of the approved instruction.

EU GMP Ch. 4, 4.6

Official text

Documents should not be hand-written; although, where documents require the entry of data, sufficient space should be provided for such entries.

Revision 1 · in force since 30/06/2011

Read why, then try again.

Correct

Consequence

You work with the instruction in force. The photocopy is withdrawn by whoever is responsible for that under the site's procedure, and nobody else risks using it.

GMP requirement

Work is done in accordance with written instructions, using the approved version in force: uniquely identified, signed and dated by authorised persons, with an effective date. Documents are reviewed and kept up to date.

EU GMP Ch. 4, 4.3

Official text

Documents containing instructions should be approved, signed and dated by appropriate and authorised persons. Documents should have unambiguous contents and be uniquely identifiable. The effective date should be defined.

Revision 1 · in force since 30/06/2011

EU GMP Ch. 4, 4.5

Official text

Documents within the Quality Management System should be regularly reviewed and kept up-to-date.

Revision 1 · in force since 30/06/2011

EU GMP Ch. 5, 5.2

Official text

All handling of materials and products, such as receipt and quarantine, sampling, storage, labelling, dispensing, processing, packaging and distribution should be done in accordance with written procedures or instructions and, where necessary, recorded.

Revision 2014 · in force since 01/03/2015

EU GMP Ch. 4, 4.20

Official text

It should be based on the relevant parts of the currently approved Manufacturing Formula and Processing Instructions

Revision 1 · in force since 30/06/2011

In the unadopted draft this would become 4.36

GMP requirement

The documentation system sets out how master documents and official copies are controlled. A loose photocopy with handwritten notes escapes that control.

EU GMP Ch. 4, 4.1

Official text

Relationships and control measures for master documents, official copies, data handling and records need to be stated for both hybrid and homogenous systems.

Revision 1 · in force since 30/06/2011

Depends on your site

How you recognise the official copy (stamp, colour, signature, electronic system), who withdraws superseded versions and who you report to is set out in your site's procedure.

Incorrect

Consequence

“Almost the same” is not enough: you do not know what changed between version 2 and version 3. If the difference concerns a critical step, the error reaches the product.

GMP requirement

Every instruction is uniquely identifiable and has a defined effective date: that is exactly how you know which version applies today.

EU GMP Ch. 4, 4.3

Official text

Documents containing instructions should be approved, signed and dated by appropriate and authorised persons. Documents should have unambiguous contents and be uniquely identifiable. The effective date should be defined.

Revision 1 · in force since 30/06/2011

GMP requirement

GMP expects the system to set out how master documents and official copies are controlled, and the reproduction of working documents not to introduce errors. A photocopy made outside the system, from a superseded version and with handwritten notes, escapes both controls.

EU GMP Ch. 4, 4.1

Official text

Relationships and control measures for master documents, official copies, data handling and records need to be stated for both hybrid and homogenous systems.

Revision 1 · in force since 30/06/2011

EU GMP Ch. 4, 4.2

Official text

The reproduction of working documents from master documents should not allow any error to be introduced through the reproduction process.

Revision 1 · in force since 30/06/2011

Read why, then try again.

Choose an answer: the consequence and the reason appear right below it.

In Academy courses every scene works like this: you choose, see the consequence and read the reason why, with the reference. If you get it wrong, you try again; after two attempts you see the solution, explained.

Discover the Basic level for operators

A scene from Mission 4 of “GMP for Production – Basic: Operators”. The product, batch and documents are fictional.

  • Chapter and paragraph

    Every requirement points to the official EU GMP text in force: open the reference and read the original quotation.

  • Checked quotations

    Before publication, an automated check compares every quotation, word for word, with the official text.

  • No AI during the course

    Content and questions written and checked before publication; scoring with fixed rules.

  • Verifiable certificate

    A unique code and a public verification page that shows only the initials.

Catalogue

Discover the courses

Scenario-based online GMP courses, each designed for a role. Each course card shows who it is for, how long it takes, which languages it is available in and what it costs.

A working shift in 8 stops

  1. 06:30Mission 1: Start-of-shift briefing
  2. 06:50Mission 2: Changing room and entry to production
  3. 07:20Mission 3: Tour of the production area
  4. 08:00Mission 4: At the bench, with the batch record
  5. 13:30Mission 5: Warehouse and dispensing
  6. 14:30Mission 6: Process start-up and packaging
  7. 15:45Mission 7: Something doesn't add up
  8. 17:30Mission 8: End of shift and handover
  9. Final assessment

Basic levelProduction learning path · step 1 of 3Production operators

GMP for Production – Basic: Operators

Formerly GMP Fundamentals

GMP for the pharmaceutical production operator, over one working shift

A shift at a fictional plant, from the start-of-shift briefing to the handover: hygiene, documentation, materials, checks and anomalies, with the reason behind every rule.

Structure
8 missions and a final assessment
Duration
About 3 hours, final assessment included
Languages
Italian, English, French, German and Spanish
Access
12 months from purchase
At the end
Certificate of completion with a verification code
References
EU GMP, EudraLex Volume 4, Part I, Chapters 1–5

€79,00 VAT included · one-time payment

Discover the course See the programme

Already have a course? Access your courses

Why it is different

Not the usual GMP course: here you decide, and find out why

What you have just tried is the heart of every Academy course. Every scene has four steps.

  1. The situation

    A specific moment in the shift: a bench, a colleague, a document, a time of day.

  2. The decision

    You choose what to do, as you would on the shop floor.

  3. The consequence

    You see what happens to the batch, to production and to the patient.

  4. The reason why

    What GMP expects, with chapter and paragraph, and what your site decides.

Read-only GMP trainingTraining Academy courses
You read and watchYou decide and act: choices, dialogues with colleagues, records to check and correct
A quiz that only says “right” or “wrong”After every choice, the consequence and the reason why, with the reference
Rules with no sourceEvery requirement with its chapter and paragraph of the EU GMP in force
Requirements and company practice in the same listFour labels separate the requirement, the interpretation, the site’s choice and the example
A lesson to finish in one sittingMissions of about 20 minutes: pause and resume, even on another device
Reaching the end is enoughA certificate only if you pass the final assessment, with a pass mark stated in advance
Points, leaderboards, timersMastery for each mission and competence badges, with no comparisons between people

Discover the courses

Regulatory rigour

Every rule with its EU GMP chapter and paragraph

Every explanation carries one of these four labels. That way you can tell what GMP asks for apart from what your company decides.

  • GMP requirement

    GMP calls for this: the reference gives the chapter and paragraph of the official text in force.

    Example from the course

    Only starting materials released by Quality Control and within their retest period are used.

    EU GMP Ch. 5, 5.34

  • Interpretative model

    A framework used by authorities and associations to interpret the rules, such as ALCOA+. Useful, but it is not the GMP text.

    Example from the course

    Data integrity guidelines sum up these expectations with the acronym ALCOA: attributable, legible, contemporaneous, original, accurate; some use the extended form ALCOA+. It is an interpretative model used by regulators and useful to remember, but it does not appear in the current text of Chapter 4. In Chapter 4 you will find the behaviours it describes, for example “legible” (4.7) and “contemporaneous” (4.8).

  • Depends on your site

    GMP sets the principle, not how to apply it: how it is done in your production area is set by your company’s approved procedures and job-specific training.

    Example from the course

    How you recognise a material’s status (label, computerised system, separate area) and who to report a possible delay to is set out in your site’s procedure.

  • Teaching example

    Invented names, codes and values for practice: a choice made for the scene, not a rule.

    Example from the course

    The material, batches and warehouse areas are made up for this scene.

The reference, as it opens in the course

EU GMP Ch. 5, 5.34

Official text

Only starting materials which have been released by the Quality Control department and which are within their retest period should be used.

Revision 2014 · in force since 01/03/2015

Sources: EudraLex, Volume 4, Part I, Chapters 1–5, in the versions in force. Each course lists its sources on its course page.

How you get the certificate

Final assessment and verifiable certificate of completion

  1. Missions

    Short scenes that you can pause and resume whenever you like.

  2. Final assessment

    Scenario-based questions, a pass mark stated in advance, no countdown. The score is calculated on the server with fixed rules.

  3. Certificate

    A PDF with your name, the course, the expected duration, the result and a unique code.

  4. Verification

    Anyone can check its authenticity with the code: the page shows only the initials.

GuideGxP Training AcademyPage 1 of 2Certificate of completionThis is to certify thatName Surnamehas completed the courseGMP for Production – Basic: OperatorsCourse level: BasicExpected training time: 187 minCompletion date: dd/mm/yyyyCourse version: 1.0.0Final assessment passed: 20 correct answers out of 25 (80%)Certificate code: GXA-XXXX-XXXX-XXXXVerify authenticity: https://academy.guidegxp.com/en/verificaGuideGxP Training Academy · www.guidegxp.comCertificate of completion of a training course. It is not a GMP certification, it does not attest to job qualification and itdoes not authorise the holder to carry out operations at a manufacturing site: job-specific training and qualification remainthe company's responsibility.SAMPLE

GuideGxP Training AcademySAMPLE

Valid certificate

This code matches a certificate of completion issued by GuideGxP Training Academy.

Certificate code
GXA-XXXX-XXXX-XXXX
Holder (initials)
N. S.
Course
GMP for Production – Basic: Operators
Course version
1.0.0
Completion date
dd/mm/yyyy
Expected training time
187 min

To protect personal data, we show only the holder's initials.

A certificate that states exactly what you have done, and that anyone can verify. It is not a GMP certification and does not replace job qualification: it states that you completed the course and passed the final assessment.

Verify a certificate

Who the online GMP courses are for

  • Production operators

    You work in production and want to understand why GMP asks for what it does, through situations you recognise.

  • New starters

    You are getting ready to start in production. No prior GMP knowledge is needed: you start from the basics, with concrete cases.

  • Quality and training staff, area supervisors

    You are looking for a common GMP foundation for operators, alongside training on the site’s procedures.

GMP, not SOPs. The courses teach what GMP asks for, the risk to control and the principle that should guide what you do. Where its application depends on the site, they say so and refer you to your company’s approved procedure.

They do not replace hands-on job-specific training or qualification.

Training a production team or a group of new starters?

The same GMP training for everyone, in five languages, with a final assessment and a verifiable certificate for each person. Tell us how many people and which languages, and we will send you a written proposal. The request involves no commitment and no payment.

Request a proposal

Frequently asked questions about online GMP courses

How do Academy courses work?

Each course is a series of short missions at a fictional plant. In every scene you decide what to do, see the consequence and read what EU GMP expects, with chapter and paragraph. At the end there is a final assessment: if you pass it, you receive a certificate of completion.

How much do they cost and how do I pay?

Each course has its own price, VAT included, shown on its course page. You pay once through the GuideGxP checkout: it is not a subscription and does not renew.

How do I access the courses?

With your GuideGxP account, the same one you use in the shop: no extra password. Access is activated automatically after payment; sign in with the email address used for the order.

How long can I take a course?

For 12 months from purchase. You can stop and resume whenever you like: your progress is saved to your account, even if you change device.

What do I receive at the end?

If you pass the final assessment, a certificate of completion in PDF with a unique code. Anyone can check its authenticity on the verification page, which shows only the holder’s initials.

Do you issue a GMP certification?

No. If you pass the final assessment, you receive a certificate of completion: it states that you completed the course and passed the assessment. It is not a GMP certification, it does not attest to job qualification and it does not authorise you to carry out operations. The GMP certificate provided for in EU legislation applies to manufacturing sites: it is issued by the competent authority when an inspection shows that the site complies with GMP.

Is GMP training mandatory?

Yes, for anyone who manufactures medicinal products: EU GMP expects the manufacturer to provide training for all personnel whose duties take them into production and storage areas or into control laboratories, and for other personnel whose activities could affect the quality of the product (Ch. 2, 2.10). Besides basic GMP training, it calls for training appropriate to the duties assigned to newly recruited personnel, continuing training with an assessment of its effectiveness, and training records (2.11). Which training is needed and how it is recorded is set by your company’s approved training programme.

How often should GMP training be repeated?

EU GMP calls for continuing training and a periodic assessment of its effectiveness, but does not set a frequency: your company’s approved training programme sets it.

What is the difference between GMP and SOPs?

GMP sets the principle, not how to apply it: how it is done in your production area is set by your company’s approved procedures (SOPs) and job-specific training. The courses teach the requirements and tell you, with the “Depends on your site” label, when the procedure decides.

Do the courses use artificial intelligence?

No, not while you use them: content and questions are written and checked before publication, and the score is calculated with fixed rules. During the course and the assessment, no answer is generated on the fly.

Can I take the courses on my phone?

Yes. They run in the browser, on a computer or phone, with nothing to install. Every exercise works by touch or keyboard, with no dragging, and your progress is saved to your account.

Which languages are the courses available in?

Currently: Italian, English, French, German and Spanish. The course opens in the language you use in the shop, if available.

Can I withdraw from my purchase?

If you buy as a consumer, you can withdraw within 14 days of the conclusion of the contract, even if you have already started or completed the course: we refund the full price. When you withdraw, your access closes and any certificate you have obtained is revoked. If you buy for your professional activity, the consumers’ right of withdrawal does not apply. Details: Refund Policy, Part C.

Step onto the shop floor, at your own pace.

Choose a course, start whenever you like and pick up where you left off, even on another device.

  1. 06:30Mission 1: Start-of-shift briefing
  2. 06:50Mission 2: Changing room and entry to production
  3. 07:20Mission 3: Tour of the production area
  4. 08:00Mission 4: At the bench, with the batch record
  5. 13:30Mission 5: Warehouse and dispensing
  6. 14:30Mission 6: Process start-up and packaging
  7. 15:45Mission 7: Something doesn't add up
  8. 17:30Mission 8: End of shift and handover
  9. Final assessment

The certificate of completion is not a GMP certification, does not attest to job qualification and does not authorise the holder to carry out operations at a manufacturing site: job-specific training and qualification remain the company’s responsibility.

GuideGxP is an independent publisher and is not affiliated with, approved or sponsored by the authorities and organisations mentioned.